DYNACORD
Welcome to dynacord.com. Please click here if you want to change your language and location settings!
/flash/en/product_01.swf?myURL=/images/produkte/f12cwh/&myHEADLINE=Forum Line&myTXT=Loudspeakers

F 12 CWH

Home / Products / All products / Loudspeakers / Forum Line / F 12 CWH

The F 12 CWH is concepted as a medium long-throw mid/high- frequency cabinet in coaxial design. But it can be used also without subwoofer cabinets in high-quality sound reinforcement system for speech, if long distances are demanded. The recommended active x-over frequency is 160 Hz, 18 dB/oct. Butterworth. In the lo-mid range an DL 12 ST Electro-Voice loudspeaker chassis works into a conical horn. The 80x55 Constant Directivity horn, driven by a 2inch driver DH7 variant delivers the frequency range above 800 Hz. Therefore the F 12 CWH is equipped with a passive x-over (800 Hz, 18 dB/oct). Every loudspeaker chassis is reliably protected against critical power levels and short thermal overload by thermo switches and halogen lamp protection. The F 12 CWH cabinet is made of poplar plywood 15 mm. All corner joints and braces are grooved and glued, in order to reduce natural resonances to a minimum. The cabinet surface is finished in extremely resistant needled black-mottled felt. A powder-coated steel grid and an acoustic foam front protects the speaker front. The connector panel uses two 4-pole Speakon connectors (Input/Output) for safe connection and easy chaining to the next loudspeaker. The pin assignment is switchable from NORMAL to SYSTEM. The handle trays on the sides guarantee easy and safe transport. 4 large-sized rubber feet and 4 castors allow easy handling and safe stand. A recessed speaker- stand threaded flange on the top and a speaker-stand sleeve at the bottom allow various setups (clusters, stacks).
Datasheets / Manuals
Nominal impedance
8 Ohms
Rated power capacity RMS
350 Watts EIA RS-426 A
Program power capacity
700 Watts
SPL 1W/1m
106 dB
Max. SPL 1m
134dB (calculated Progr. Power Capacity )
Frequency range ( -10 dB )
100 Hz - 19 kHz
Components Lo
Electro-Voice DL 12 ST
Components Hi Driver
EV-DH7
Components Hi Horn
EV-HP 8055
Connections
2 x Speakon connectors, NORMAL: PIN 1+/1-, SYSTEM: PIN 2+/2-
Cabinet style
15 mm poplar plywood, 2 handles, 4 rubber feet, 4 castors, 1 Speakerstand threaded flange, 1 Speakerstand sleeve
Outfit
Needled felt surface black, Powder-coated steel grid, acoustic foam front
Dimensions ( WxHxD )
606 x 625 x 792 mm (incl. castors, feets)
Weight
54 kg
Warranty
36 months
news
Rock legends Nazareth rock Czech Republic with DYNACORD
Read more...
news
Record-breaking European triathlon championships with power from DYNACORD and Electro-Voice
Read more...