Member Area (Login) | WEEE Compliance | Warranty Conditions | Imprint | Privacy | Language    
DYNACORD
Welcome to dynacord.com. Please click here if you want to change your language and location settings!
R

The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in DYNACORD PowerH amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.

Datasheets / Manuals
Photos
Analog audio input
2 audio inputs on internal slot connector, pre-/post fader selectable
A/D conversion
24 Bit linear, sigma-delta, 128x oversampling
Control Protocol
OMNEO
D/A Conversion
24 Bit linear, sigma-delta, 128x oversampling
Data Format
24 Bit linear A/D and D/A conversion, 48 Bit processing
Digital Inputs
Omneo Network and AES3 (AES/EBU) format, XLR in/ thru connectors
GPIO Control Ports
1 x 6-pole Euro block 2 control inputs (Uin max. 5 V) 2 control outputs (2x 100 mA) 2 reference outputs (+5 V, 200 mA; GND)
Internal Processing
Dual core DSP, 500 MIPS
Network Control (IRIS-Net)
Yes
Sample Rate
48 kHz
Sample Rate Conversion (SRC)
32–192 kHz, internal samplerate- converter
Signal-to-Noise Ratio (A-weighted)
ADC: 120 dB typical DAC: 120 dB typical AES3: 128 dB typical Analog In to Analog Out: 116 dB typical
THD+N
< 0.002 %
Height
80.4 mm (3.17")
Width
84.7 mm (3.33")
Depth
230.8 mm (9.09")
Weight Net
14.11 oz (400 g)
news
DYNACORD presents the RCM-28 module with OMNEO network technology
Read more...