 |  |  |  |  |  |  |
/flash/en/category_family_01.swf?myURL=/images/produkte/dcs_400series/&myHEADLINE=DCS 400 Series&myTXT=Digital Control System
DCS 400 Series
Home / Products / All products / Digital Control System / DCS 400 SeriesThe DCS 400 is a 19" base unit with a height of 2 RU. It can host a control module as well as several relay modules, logic input modules and analog in- / output modules which are connected via internal backplane. The DCS 400 has CE marking as well as UL and CSA recognition.
Interface for relay modules, logic input modules, in- / output modules for analogue levels, audio monitor and rotary encoders
The modules are used to provide connection to another DCS 400 rack frame and / or other DCS 400 boards
The module is meant for insertion on the rear of the DCS 400 rack frame providing shielding between DCS 408R and DCS 409R modules
The module provides switching for audio signals (line level) or control outputs independent from the DCS 400 system
These modules provide relay contact closures for use in switching audio or other control functions
These modules provide relay contact closures for use in switching audio or other control functions
The module provides inputs for control lines, pushbuttons, switches and sensors allowing the evaluation of their individual status (on/off) in the DPM 4000 system
The module provides analogue input and output interfacing capabilities for use in monitoring and control functions
The audio monitor unit is a 2 RU unit offering acoustic control and visual level metering of audio in the PROMATRIX® system
The DCS 421R is a control module for permanent monitoring in combination with DCS 422R and DCS 423R modules
The DCS 422R is a NF input switching with pilot tone generation and summation
The DCS 423R is a slide-in module with 4 relays for 100 V switching of the power amplifier outputs with pilot tone evaluation
The DCS ANS (Ambient Noise Sensor) is a modular and automatic volume adjustment
Datasheets / Manuals