Multi Amplifier Remote Control (MARC) Software

    • Intuitive system control to design, operate and supervise up to eight amplifiers
    • Configurable control groups with GEQ, PEQ and Delay for real time system editing
    • System scene manager for easy store and recall of user presets
    • Complete offline system editing for offsite configuration

Dynacord’s Multi Amplifier Remote Control (MARC) software allows you to design, control and supervise sound systems driven by Dynacord’s L- and C-series amplifiers in a fast and intuitive workflow. Up to eight amplifiers can be configured, controlled and supervised in a single project file using a USB plug ‘n’ play set-up. The configuration of the amplifiers includes the loading of factory speaker settings, including FIR-Drive settings with TEMP limiters. Alternatively user made speaker settings can be created out of a large selection of DSP parameters, including 6-band PEQs, professional x-over filters, allpass filters and limiters.

Up to 16 control groups can be created that can contain one or multiple amplifier channels to allow fast but flexible control of a system. Each control group features VU metering, level and mute and can include one or multiple of the control group function blocks: 5-band PEQ, 31-band GEQ and output delay up to 650ms. This gives the option for complex groupings with a “master EQ” for all speakers but individual PEQ’s levels and delays are easy to create.

Each system setting can be stored in one of the 50 user presets of the amplifiers and recalled with the “system scene manager”. The supervision page is showing all amplifiers that are online with VU metering for in- and outputs including clip and limit, current preset number, health status, real time impedance measurement including warning flags for open and short circuit and the loaded speaker setting file name.

To stay informed about future software releases please subscribe to the Dynacord E-Newsletter by clicking the link at the bottom of the page.


Minimum System Requirements - Operating System: Windows 7, Windows 8.1, or Windows 10
- CPU: 64 bit dual core @ 2.0GHz
- Screen resolution (min): 1024x748 pixel, 4GB Memory, USB 2.0 port.
For more details and installation notes please refer to the readme file.

Complementary Products

DSP Power Amplifier 2x650W, Install

DSP Power Amplifier 2x650W

DSP Power Amplifier 2x950W, Install

DSP Power Amplifier 2x950W

DSP Power Amplifier 2x1400W, Install

DSP Power Amplifier 2x1400W

DSP Power Amplifier 2x1800W, Install

DSP Power Amplifier 2x1800W


Name Language Type Size Date
MARC 1.0.0 ReadMe EN 150KB Jul 28, 2017
MARC Quick Start Guide EN 3.42MB Aug 23, 2017
Name Size Date
Multi Amplifier Remote Control (MARC) Software 51.62MB Aug 24, 2017
Name Language Size Date
MARC FAQs EN 45KB Aug 23, 2017

dynacord marc software