Skip to content
C3600FDi
C3600FDI

THE TOP OF THE C-SERIES.

A 2 x 1800 W Class-H install amplifier with FIR drive for the most demanding fixed systems.

C3600FDi

2x 1800W DSP Power Amplifier for fixed installation

Anchor the largest install with the most output in the line. The C3600FDi delivers a 2 x 1800 W Class-H output stage and the full C-Series DSP — FIR filters, per-channel PEQ, output delay, and load-impedance monitoring — for rooms where coverage and control both have to be absolute. Direct-drive 70 V/100 V feeds distributed lines straight, deep protection guards every fault path, and three-stage cooling keeps it composed under sustained demand. Large venues, arenas, and multi-zone halls run on it.

Key features

Lead the line
2 x 1800 W from a Class-H output stage.
Tune to the room
FIR filters, PEQ per channel, and output delay onboard.
Feed lines direct
70 V/100 V operation without an output transformer.
Guard every path
protection for temperature, DC, HF, back-EMF, and inrush.
Stay composed
front-to-rear three-stage fans in a 19-inch, 2 RU chassis.
Quiet where it counts
signal-to-noise ratio better than 109 dB, A-weighted.

Two-channel power amplifiers

L Series and C Series Amplifiers

Complete the System

Where this unit fits, and what it pairs with.

Specifications

Overview & Features

Configuration

2-channel

Acoustic Performance

Frequency Response

10 Hz to 21 kHz (±1 dB)

THD+N

< 0.05 %

Crosstalk between channels (dBA)

< -80 dB

Signal-to-Noise Ratio

>109 dB

Power & Amplification

Total Output Power*

3600 W