FLY THE LOW END

Name: EVA 2151D
Brand: Electro-Voice
SKU: F.01U.201.420
Availability: OutOfStock

The high-power, dual 15-inch EVA subwoofer for installs that need the low end flown, not stacked.

EVA 2151D

Line Array Subwoofer Dual DVX3159

Where to buy

Documentation & Downloads

Anchor the array from the top down. The EVA-2151D is a high-power, dual 15-inch, front-loaded subwoofer built for fixed installation, driven by two DVX3159A 15-inch drivers, with PI versions adding a stainless steel three-layer grille and a CDG dual gland nut cover for indirect outdoor exposure. A 130 dB continuous, 136 dB peak module rated 1000 W continuous, it runs 4 ohms nominal with no internal passive crossover, so it needs an active crossover and its own amplifier channels. An 18 mm 13-ply birch plywood enclosure with EVCoat, reinforced with internal steel rigging, carries the load. Fly it at the top of an EVA full-range array or in standalone subwoofer arrays on the EVA-EG2 grid, indoors or out.

Key features

Dual 15-inch, front-loaded

Two DVX3159A 15-inch drivers in a front-loaded, high-power subwoofer module built for fixed installation.

130 dB output

130 dB continuous and 136 dB peak, with 1000 W continuous and 4000 W peak power handling.

38 Hz low end

Frequency response of 38 Hz to 200 Hz at minus 3 dB, extending to 28 Hz at minus 10 dB.

Active-drive design

No internal passive crossover, so the module needs an active crossover and dedicated amplifier channels, running 4 ohms nominal.

Flies on the EG2 grid

Arrays at the top of an EVA full-range array or in standalone subwoofer arrays on the separately available EVA-EG2 grid.

Indoor or outdoor build

An 18 mm 13-ply birch plywood enclosure with EVCoat, with PI versions adding a stainless steel three-layer grille and CDG gland nut cover for indirect outdoor exposure.