IX30:4
IX30:4
TWICE THE POWER. SAME SMARTS.
A 4-channel networked DSP amplifier with 3 kW total output, a 12 x 12 matrix mixer, and SONICUE control.
Step up the output, keep the whole engine in one box. The IX30:4 delivers 3 kW of powerTANK power, a native 96 kHz DSP, a 12 x 12 matrix mixer, Dynacord FX, and FIR-Drive — across eight Dante inputs, eight Dante outputs, and four mic/line inputs. powerTANK drives Hi-Z or Lo-Z without a mode switch. ghostPOWER over PoE keeps the DSP and network alive when mains drops, and ecoRAIL trims the bill. Sports venue, worship, performing-arts center, hospitality.
Key features
More headroom, same footprint
3 kW total across four channels in a single rack unit.
powerTANK power sharing
One power budget for the whole amplifier — powerTANK shares the total output across channels, so any channel can draw more when it needs it.
Hi-Z or Lo-Z drive per channel
Select constant-voltage or low-impedance operation for each channel — no bridging required for 100 V lines.
Mixer built in
native 96 kHz DSP with a 12 x 12 matrix mixer, Dynacord FX, and FIR-Drive.
Stay up when mains drops
ghostPOWER over PoE holds the DSP, Dante network, and inputs active.
Run lean
patented ecoRAIL technology trims energy draw, with idle/eco mode at 26 W.
Catch a dead feed
pilot-tone detection on all 12 inputs, with automatic switchover to a failover source.
Multichannel networked DSP amplifiers
IX Series Amplifiers
Complete the System
Where this unit fits, and what it pairs with.
Specifications
Overview & Features
- Configuration
4-channel
Acoustic Performance
- Frequency Response
20 Hz to 20 kHz (±1 dB)
- THD+N
<0.1 %
- Crosstalk between channels (dBA)
< -80 dB
Power & Amplification
- Total Output Power*
3000 W
- Bridged Output Power 4 Ω
1500 W
All IX Series Products
Explore
