SIX HUNDRED WATTS. HALF A RACK.
V600:2
2-channel, 600W powerTANK Power Amplifier for fixed installation
- Total Output Power*
- Power Tank
- Output Power* @ 70 V; all channels equally driven
- Channels
Dynacord has introduced the V600:2, a 600-watt two-channel amplifier that extends its V Series family for small to mid-sized fixed installations. The model was revealed at ISE 2024.
The amplifier occupies one rack unit in height and half a rack width, which opens up flexible mounting — including under-counter installation.
powerTANK acts as a power reservoir, giving the V600:2 direct access to its full 600 watts and allowing asymmetric power allocation across channels as needed.
Energy use is held down by ecoRAIL, with Auto Power Down shutting the amplifier off when no audio signal is present. The V600:2 also includes dualCOOL thermal management.
Key Features
Official how-to
How to Configure the V600
Complete the System
Where this unit fits, and what it pairs with.
Specifications
Acoustic Performance
- Frequency Response
Filter-selectable, -3 dB (ref. 1 kHz, analog in to speaker out): HP 30/100/150 Hz to 20 kHz, LP 30 to 150 Hz (4/8 ohm); HP 50/100/150 Hz to 20 kHz, LP 50 to 150 Hz (70/100 V)
- THD+N
< 0.1% (1/8 rated output power, 1 kHz)
- Crosstalk between channels (dBA)
< -70 dB (4 ohm) to < -95 dB (100 V), ref. 1 kHz, 12 dB below maximum
- Signal-to-Noise Ratio
> 100 dB (A-weighted, ref. rated output power)
Power & Amplification
- Total Output Power*
600 W
- Direct Drive (70V/100V)
Yes
