IPX10:8
IPX10:8
EIGHT CHANNELS. ONE NETWORKED BRAIN.
An 8 x 1250 W networked install amplifier with OMNEO/Dante, FIR drive, and direct-drive output.
Run eight channels of a networked install from a single 2 RU box. The IPX10:8 puts out 8 x 1250 W of Class-D power with redundant OMNEO/Dante audio over EtherCON, plus the deepest DSP in the line — FIR filters up to 1,025 taps, per-channel speaker EQ, crossovers, and limiters. Direct-drive mode feeds 70/100/140/200 V lines straight, with impedance measurement and load monitoring watching each output. Source supervision and pilot-tone fallback keep audio alive if a feed drops. Arenas, transit hubs, and large multi-zone installs run on it.
Key features
Power eight zones
8 x 1250 W of Class-D output from one 2 RU chassis.
Network it redundantly
OMNEO/Dante over dual EtherCON, 48/96 kHz.
Shape the array
FIR up to 1,025 taps, plus speaker EQ, crossovers, and limiters.
Drive lines direct
70/100/140/200 V output with load monitoring per channel.
Stay on air
source supervision and pilot-tone fallback switch over on signal loss.
Wire it from the box
ships with Euroblock input, output, and GPIO connectors, rack screws, and the 32A powerCON.
Short introduction
IPX Series Amplifiers
Complete the System
Where this unit fits, and what it pairs with.
Specifications
Overview & Features
- Configuration
8-channel
Acoustic Performance
- Frequency Response
20 Hz to 20 kHz (±0.5 dB)
- THD+N
< 0.05 %
- Crosstalk between channels (dBA)
< -80 dB
Power & Amplification
- Total Output Power*
10.000 W
- Bridged Output Power 4 Ω
2600 W