IX30:8
IX30:8
EIGHT CHANNELS. ONE ENGINE.
An 8-channel networked DSP amplifier with 3 kW total output, a 16 x 16 matrix mixer, and SONICUE control.
Cover more zones from one rack unit. The IX30:8 spreads 3 kW across eight channels, backed by a native 96 kHz DSP, a 16 x 16 matrix mixer, Dynacord FX, and FIR-Drive — with eight Dante inputs, eight Dante outputs, and eight mic/line inputs. powerTANK drives Hi-Z or Lo-Z without a mode switch. ghostPOWER over PoE keeps the DSP and network alive when mains drops, and ecoRAIL trims the draw. Multi-zone retail, transit, worship, hospitality.
Key features
Eight channels, one box
3 kW total with a 16 x 16 matrix mixer for multi-zone routing.
powerTANK power sharing
One power budget for the whole amplifier — powerTANK shares the total output across channels, so any channel can draw more when it needs it.
Hi-Z or Lo-Z drive per channel
Select constant-voltage or low-impedance operation for each channel — no bridging required for 100 V lines.
Wide I/O
8 Dante mic/line inputs usable as Dante break-in points, and 8 Dante outputs.
Stay up when mains drops
ghostPOWER over PoE holds the DSP, network, and inputs active.
Run lean
patented ecoRAIL technology trims energy draw, with idle/eco mode at 40 W.
Control from the wall
runs as a SONICUE control server for the WPN1 wall controller, TPC-1, iOS, and Windows devices.
Multichannel networked DSP amplifiers
IX Series Amplifiers
Complete the System
Where this unit fits, and what it pairs with.
Specifications
Overview & Features
- Configuration
8-channel
Acoustic Performance
- Frequency Response
20 Hz to 20 kHz (±1 dB)
- THD+N
<0.1 %
- Crosstalk between channels (dBA)
< -80 dB
Power & Amplification
- Total Output Power*
3000 W
- Bridged Output Power 4 Ω
750 W
All IX Series Products
Explore
