TGX10
Put the whole front-of-house rig in one rack space. The TGX10 drives four channels at up to 2,600 W each into 2 ohms, with Class D output and a damping factor over 400 for tight low end. Onboard DSP runs 32/40-bit floating-point processing — up to 1,025-tap FIR, full crossovers, and per-channel limiters — fed by analog, AES3, or redundant Dante. Source supervision fails over automatically when a feed drops. Touring rigs, festivals, and fixed installs that can't afford a surprise.
Key features
One box, four channels
up to 2,600 W per channel into 2 ohms with a damping factor over 400.
Process on board
32/40-bit floating-point DSP with up to 1,025-tap FIR and per-channel limiters.
Feed it anything
analog, AES3, and redundant primary/secondary Dante on etherCON.
No silent failures
AES3 lock and Dante supervision switch over automatically when a source drops.
Drive it from the front
3.5" color TFT, rotary encoder, and capacitive touch screen.
Test from the amp
built-in sine and noise generator, impedance measurement, and load monitoring.
The flagship for live sound amplification
TGX Series Amplifiers
Complete the System
Where this unit fits, and what it pairs with.
Specifications
Overview & Features
- Configuration
4-channel
Acoustic Performance
- Frequency Response
20 Hz to 20 kHz (±0.5 dB)
- THD+N
< 0.05 %
- Crosstalk between channels (dBA)
< -80 dB
- Signal-to-Noise Ratio
112 dB
Power & Amplification
- Total Output Power*
10000 W
